MARBREX® R, lime putty
MARBREX® R, natural and eco-friendly lime plaster for indoor and outdoor use
MARBREX® R is a lime putty obtained by a maturing process of 3 to 24 months, powdered marble (grain size of 0 to 0.7mm) and vegetable additives. Made from a selection of non-toxic and biodegradable ingredients that are eco and health friendly . Free from asbestos, formaldehyde and heavy metals.
MARBREX® R lime plaster gives a very fine texture with nuances and warm colors. A variety of finishes can be obtained: applying in one coat, sponge floated for a delicately rustic surface, or in two coats, burnished for a rough stone look or a smooth finish like matt stucco.
Where do it use MARBREX® R ?
Indoor and outdoor surfaces should be in conformity with the current standards in force. Surfaces must be homogeneously absorbent, sound, clean, dry, non-friable and deprived of salts, moisture and moulds.
Marbrex® R lime plaster is a natural and eco-friendly lime plaster for indoor and outdoor use. It has been modified and improved using the latest techniques so as to offer excellent aesthetic and adhesive qualities.
This lime plaster is suitable for indoor decoration (halls, staircases, living rooms, bedrooms …) as well as building facades. It is particularly recommended for historical buildings, in any town center renovation ventures as well as for an improved aesthetic integration of new buildings into existing environments.
Marbrex® R lime plaster is available in white and is colored using compatible natural pigments or dyes.
▸ Surface preparation
Marbrex® R lime plaster can be applied directly to natural lime plasters, preferably a fresco (wet on wet). When used a secco (after drying), dampen the wall with clean water, avoiding streaming before applying Marbrex® R lime plaster.
Plasterboards and other types of boards must be primed with a water-based primer before applying SOUS COUCHE POUR CHAUX EXTRA lime primer
For other surfaces, contact us for technical support.
Appropriate tools : stainless steel trowe l, sponge float. MARBREX® R lime plaster may be projected.
Apply 1 or 2 coats of MARBREX® R lime plaster, 2 to 3mm thick, depending on the finish you want. Do not go beyond 3mm thick per coat.
Interesting antique or multi-color effects can be created with natural pigments and our VELATURA glaze or using our BADIMAT® lime wash paint over the MARBREX® R lime plaster surface.
Drying time - Carbonation
24 hrs to 48 hrs depending on the absorbency of the substrate and the ambient humidity.
Where humidity, condensation or water-vapor is present, efflorescence, whitening, variations in color and fading may occur on surfaces that are not totally carbonated. Protect the end result from any rain for several days. To accelerate carbonation after the lime plaster has thoroughly dried, we recommend that you spray the surface gently from bottom to top with clean water using a low pressure spray. Avoid any streaming. Repeat this several times, leaving time to dry in between each spraying.
To protect the surfaces from water and stains: you can waterproof using our HYDRO R water repellent (1 or 2 coats) and if you want a shine finish you can wax with our CIRE SOLIDE bees and carnauba wax (1 or 2 coats).
For outdoor work, waterproof with 1 or 2 coats of our HYDRO R water repellent
2 kg to 3 kg / m², depending on the surface and the desired end result.
Do not apply to hot or damp surfaces or those directly exposed to the sun, or in the wind or the rain.
▸ Practical and health advices
MARBREX® R lime plaster contains lime putty.
Irritating to the eyes and skin. Avoid contact with eyes. In case of contact with the eyes, rinse well with fresh water and contact a specialist if any symptoms persist. Avoid prolonged contact with skin.
Keep out of the reach of children.
▸ Cleaning and Storage
Clean all tools with water immediately after use. Apply and store at a temperature of +5°C to +30°C (40°F or 85°F).
MARBREX® R lime plaster will keep for one year in its original closed packaging, away from frost and high temperatures. However, as it is essentially lime putty, it will keep for much longer of covered with a thin layer of clean water.
MARBREX® R lime plaster is conditioned in recyclable plastic buckets of 5 kg and 25 kg.
The information in this sheet is the expression of our knowledge and trial results, it can be considered on no account either as bringing a guarantee, or as engaging our responsibility in case of defective application. We recommend making a sample.